Self-Closing Safety Gate:The GuardDog Industrial Self-Closing OSHA Ladder Safety Gate is tough, durable and easy to install.  The Self Closing Ladder Safety Gate comes in 5 nominal sizes and is adjustable laterally up to 6'' (-3'' to +3'' of the nominal size).

The Ladder Safety Gate arm is dimensioned to match top and mid-rail heights of an OSHA compliant guardrail. When the gate is installed and the top of the gate is at the OSHA's recommended nominal height of 42", the bottom of the gate is positioned at a height of 21".

Install the GuardDog in a 'Snap'.  It comes fully assembled and includes securing hardware for standard installation on pipe. It requires only one 1/2'' wrench and a couple of minutes to install.  If you require different hardware for mounting, let us know and we will be happy to supply it.

Our standard Hinge Assembly fits round pipe or square tubing measuring up to 2'' O.D. It can also mount on angle iron or flat surfaces. For railings which are larger than 2” O.D, contact BlueWater Mfg. We will have an adaptor kit available to use or provide you with a solution to enable you to mount the gate safely.  The self-closing feature employs two (2) Stainless Steel Torsion Springs. The GuardDog can open in any direction.  Just flip the gate over for opposite direction.

The GuardDog Safety Gate comes in three finishes: Powder Coat Safety Yellow, Hot-Dip Galvanized or 316 Stainless Steel. Special colors are available upon request (min. paint charges may apply).

New Compression Clamp Assembly Makes installation
Even Faster and Each Gate Now Has 6" in Adjustability