Roof Hatch/Skylight Systems:

SR2K is THE ONLY non-penetrating system on the market today that fully complies with OSHA regulations unlike other available systems.
(Certified test results to document the compliance are available upon request).

Click here to see the new Roof Hatch Grab Bars for safe egress and ingress. A setup using a chain DOES NOT meet (Standards - 29 CFR ) 1910.23 (a)(2) The chain does not provide a mid-rail as required. Click here to see the most recent OSHA interpretation. 1910.23(a)(3)(i) Hinged floor opening cover of standard strength and construction equipped with standard railings or permanently attached thereto so as to leave only one exposed side. When the opening is not in use, the cover shall be closed or the exposed side shall be guarded at both top and intermediate positions by removable standard railings.

Roof Hatch System protecting a 2'6" X 3' Hatch. (Click on photo to enlarge)

Do Not Void Your Warranty!

• Stop Drilling into Roof Decks.
• Stop Drilling into Roof Hatch and Skylight Curbs.
• Stop Drilling into Floors.
• Stop Drilling - Period!

Features:

• Non-Penetrating.
• Independently tested and shown to meet and exceed OSHA Fall Protection Regulations for Guardrails.
• Sets up in minutes.
• The engineered bases enables the system to be set up in numerous configurations (L-Shapes, Straight Runs, Etc.).
• Easily dismantled for roof deck repair.
• The gate can be opened by the latch pole or by one of the latches.
• 1-5/8" diameter rails have a quality Powder Coat finish.
• Use as roof hatch, skylight, fire vent and floor door protection.

Skylight System protecting a 3' X 4' skylight. (Click on photo to enlarge)

Our 90 deg. welded hinge. Allows the gate to only open away from the hatch. (Click on photo to enlarge) Skylight System arranged in triangle shape (Click on photo to enlarge)

In most situations, OSHA (Std. 29 CFR 1910.23) requires guardrail protection on the exposed sides of openings in roofs and floors. 

BlueWater Mfg. has modified our SafetyRail 2000 guardrail system to meet those safety concerns.  Our Roof Hatch/Skylight Systems exceeds OSHA Std. 29 CFR 1910.23 and 1910.27.  It is the only product available in the market with a gate assembly that meets the same OSHA regulations and requires no drilling into any surface for installation.  The Roof Hatch/Skylight Systems set up in minutes and are easily dismantled for roof repair.  Sized gates enable the Roof Hatch System to be located within 6 inches of the open roof hatch.

We can configure or custom manufacture to any size hatch that is not listed above.  Please contact us for more information.

• Cade drawings
• 3-Part Specs